Electricity Bill Calculator Pakistan 2026: Easy Slab-by-Slab Guide With Real Examples

Updated: 16 Nov 20269 min readPakistan

Electricity bill calculator Pakistan searches jump every time a bill arrives that is higher than expected. The good news is that the base part of a household bill follows a published formula: your units, your slab, a per-unit rate and a fixed monthly charge. Once you know which slab you are in, you can check the main figure yourself in under a minute.

This guide gives you a working calculator built on the residential rates NEPRA notified in February 2026, explains the protected and unprotected categories that decide most bills, and shows where the extra lines on a PITC or LESCO bill come from.

Electricity bill calculator Pakistan: estimate your base bill

Enter your units and choose your category in the electricity bill calculator Pakistan box below. The result shows the energy charge, the fixed charge and, if you type in the fuel charges adjustment (FCA) per unit from your bill, that amount too. It works on phones and runs in your browser; nothing you type is sent anywhere.

Electricity bill calculator Pakistan

NEPRA 2026 ratesResidential, under 5 kW. Updates as you type.

Your category

Use a minus sign if your bill shows a negative (relief) FCA.

Estimated base bill before taxes

Rs 4,637

150 units · Unprotected · about Rs 30.91 per unit

All units, slab 101 to 200 94%Fixed charge 6%
All units, slab 101 to 200150 units × Rs 28.91Rs 4,337
Energy chargeRs 4,337
Fixed chargeper monthRs 300
Estimated base billbefore GST, duty and other taxesRs 4,637

Smart tip

Just 51 units more and every unit moves to Rs 33.10.

Cutting 50 units (to 100) puts you in the cheaper slab: about Rs 2,519, a saving of Rs 2,118.

Protected users with the same 150 units pay Rs 2,005.

Rates from NEPRA’s February 2026 decision (S.R.O. 279(I)/2026). Nothing you type leaves your browser.

This electricity bill calculator Pakistan tool gives the base amount only. Your final bill also has GST, electricity duty, any quarterly adjustment and other items set by law. Those differ by province, by tax status and by month, so use the line items on your own bill for the exact total.

Residential tariff at a glance (sanctioned load under 5 kW)

  • Rs 10.54 to 13.01per unit for protected users up to 200 units, plus a Rs 200 or Rs 300 fixed charge
  • Rs 22.44 to 47.20per unit for unprotected users, depending on the slab
  • Rs 275 to 675fixed charge per month for unprotected users, rising with the slab

Source: GoP applicable uniform tariff in NEPRA’s decision of 11 February 2026, notified by the Ministry of Energy as S.R.O. 279(I)/2026. Fuel and quarterly adjustments and taxes are extra.

Listen: one-minute audio summary

In this guide
  1. Electricity bill calculator
  2. Quick answer
  3. Current slab rates
  4. Protected vs unprotected
  5. Worked examples
  6. How to read your bill
  7. Charges the calculator leaves out
  8. Ways to stay in a cheaper slab
  9. FAQs

Electricity bill calculator Pakistan: the quick answer

How do I calculate my electricity bill in Pakistan?

Take the units on your bill and find your slab. Protected users (up to 200 units) pay Rs 10.54 for the first 100 units and Rs 13.01 for the next 100, plus a fixed charge. Unprotected users pay one rate on all units, from Rs 22.44 (up to 100 units) to Rs 47.20 (above 700 units), plus a fixed charge of Rs 275 to Rs 675. Then add the fuel adjustment and taxes printed on your bill.

Those rates come from the Ministry of Energy notification of 12 February 2026, which put into effect NEPRA’s decision on the federal government’s tariff rationalisation motion. NEPRA lists it, along with every later fuel and quarterly decision, on its official distribution tariff page. The same uniform residential rates apply to the ex-WAPDA distribution companies such as LESCO, IESCO, MEPCO, GEPCO and FESCO, and the K-Electric schedule in the same decision shows the same residential figures.

Current residential slab rates used by the calculator

Every rate in this electricity bill calculator Pakistan guide comes from one official table. The table below copies the “GoP applicable” residential column from Annex A-1 of the February 2026 decision. That is the rate consumers are actually charged; NEPRA’s higher “uniform determined” rate in the same table is the cost-based figure before the government’s cross-subsidy. You can check every number in the official S.R.O. 279(I)/2026 PDF.

Slab (units per month)Fixed charge (Rs per month)Rate (Rs per unit)
Lifeline: up to 50None3.95
Lifeline: 51 to 100None7.74
Protected: 1 to 10020010.54
Protected: 101 to 20030013.01
Unprotected: 1 to 10027522.44
Unprotected: 101 to 20030028.91
Unprotected: 201 to 30035033.10
Unprotected: 301 to 40040036.46
Unprotected: 401 to 50050038.95
Unprotected: 501 to 60067540.22
Unprotected: 601 to 70067541.85
Unprotected: above 70067547.20

Two notes printed under the official table change how the bill is worked out. First, only protected residential consumers get the benefit of one previous slab; lifeline users get no slab benefit. Second, where no fixed charge applies, a minimum monthly charge of Rs 75 (single phase) or Rs 150 (three phase) is billed even if no energy is used. Households with a sanctioned load of 5 kW or more are put on time-of-use metering, with a peak rate of Rs 46.85 and an off-peak rate of Rs 34.53 and a Rs 675 fixed charge.

Electricity bill calculator Pakistan: photographing the meter reading to check units
A photo of your meter on reading day is the easiest way to check that the units on your bill are right.

Protected vs unprotected: the line that decides your bill

Most of the difference between a cheap and an expensive bill in Pakistan comes from one question: are you protected? Protected users get rates less than half of the unprotected ones, plus the previous-slab benefit. Your bill states your category, and the calculator above lets you compare both.

Protected status depends on your consumption history rather than one month. Under the rules distribution companies apply, a household is treated as protected when its use has stayed at or below 200 units in each of the previous months of the qualifying period. If you go over 200 units, that month is billed at unprotected rates and you can lose protected status for the months after it, so one heavy month can raise several bills.

UnitsProtected bill (energy + fixed)Unprotected bill (energy + fixed)
100Rs 1,054 + Rs 200 = Rs 1,254Rs 2,244 + Rs 275 = Rs 2,519
150Rs 1,704.50 + Rs 300 = Rs 2,004.50Rs 4,336.50 + Rs 300 = Rs 4,636.50
200Rs 2,355 + Rs 300 = Rs 2,655Rs 5,782 + Rs 300 = Rs 6,082

That gap is why the 200-unit line matters so much, and why our earlier report on the Punjab tariff for users up to 200 units drew so many readers. The rates in that story have since changed, so use the table on this page for current figures.

Electricity bill calculator Pakistan: worked examples

Here is how the formula plays out at common consumption levels. These examples use the February 2026 GoP applicable rates and leave out FCA, quarterly adjustments and taxes.

ExampleHow it is worked outBase bill
Protected, 150 units100 x 10.54 + 50 x 13.01 = 1,704.50; fixed 300Rs 2,004.50
Unprotected, 250 units250 x 33.10 = 8,275; fixed 350Rs 8,625
Unprotected, 300 units300 x 33.10 = 9,930; fixed 350Rs 10,280
Unprotected, 301 units301 x 36.46 = 10,974.46; fixed 400Rs 11,374.46
Unprotected, 500 units500 x 38.95 = 19,475; fixed 500Rs 19,975
Unprotected, 701 units701 x 47.20 = 33,087.20; fixed 675Rs 33,762.20

Look at 300 against 301 units. Because unprotected users get no slab benefit, one extra unit moves every unit to the higher rate and the fixed charge also rises, adding about Rs 1,094 to the base bill. The same cliff exists at every slab edge, and it is steepest at 700 units, where the rate jumps from Rs 41.85 to Rs 47.20.

How to read your electricity bill in Pakistan

You can download a duplicate of any ex-WAPDA bill from the PITC web bill service by entering the reference number. When you have it, check these parts in order:

  • Reference number and tariff. The tariff code tells you the category (residential A-1) and helps the company trace your connection.
  • Previous and present readings. The difference is your units. Compare the present reading with a photo of your meter.
  • Units consumed and the 12-month history. The history table shows whether you have stayed within 200 units, which matters for protected status.
  • Cost of electricity. This is the energy charge the electricity bill calculator estimates.
  • Fixed charges. The monthly amount for your slab, from Rs 200 to Rs 675.
  • FCA and other adjustments. Fuel charges adjustment for an earlier month and any quarterly tariff adjustment, shown per unit or as a total.
  • Government charges. Electricity duty, GST and any other levies, plus arrears or instalments if you have them.

Charges this calculator leaves out, and why

NEPRA decides the fuel charges adjustment every month for the ex-WAPDA companies, usually for a month two months back. Its decision on the September 2026 FCA, for example, was issued on 6 November 2026. Quarterly tariff adjustments are decided separately. Because both change and may be positive or negative, the calculator lets you type in the FCA from your own bill instead of assuming a figure. Past adjustments have swung bills both ways, as our stories on a Rs 2.56 per unit increase and a later price relief showed.

Taxes are left out for the same reason. Sales tax and electricity duty are set by federal and provincial law, and the rate can depend on your consumption and on whether you appear on the Active Taxpayers List. Your bill shows each one as a separate line, which is the most accurate source for your household.

Practical ways to stay in a cheaper slab

Electricity bill calculator Pakistan: a household cutting AC use to stay in a lower slab
Air conditioners decide most summer bills; small changes in use can keep a home below a slab edge.
  • Note your meter reading a week before reading day and work out how many units you have left before the next slab.
  • If you are near 200 units, cut back for the last days of the cycle. Staying protected matters more than any single appliance.
  • Run heavy loads such as irons, motors and washing machines at different times so the sanctioned load stays realistic.
  • Set air conditioners to around 26 degrees and service filters before summer.
  • Check the bill for a wrong reading (a “detection” or estimated reading) and complain to your distribution company quickly if units look too high.

Our list of six tips to reduce summer electricity bills goes into appliance habits in more detail. If you like quick tools, our Jazz load tax calculator uses the same simple approach for mobile top-ups.

Electricity bill calculator Pakistan: FAQs

What is the per unit rate of electricity in Pakistan in 2026?

For residential users under 5 kW, the GoP applicable rates notified in February 2026 are Rs 10.54 and Rs 13.01 for protected users and Rs 22.44 to Rs 47.20 for unprotected users, depending on the slab. Fuel and quarterly adjustments and taxes are added separately.

What is the fixed charge on a domestic electricity bill?

Since the February 2026 decision, protected users pay Rs 200 (up to 100 units) or Rs 300 (101 to 200 units) a month. Unprotected users pay Rs 275 to Rs 675, rising with the slab. Lifeline users have no fixed charge.

Do unprotected consumers get the previous slab benefit?

No. The official tariff notes say only protected residential consumers get the benefit of one previous slab. Unprotected users are billed at one rate for all units in the month.

How is a 300 unit electricity bill calculated?

For an unprotected user, 300 units fall in the 201 to 300 slab, so all 300 units are charged at Rs 33.10 (Rs 9,930) plus a Rs 350 fixed charge, giving a base bill of Rs 10,280 before FCA and taxes.

Is the LESCO bill calculator different from IESCO or MEPCO?

The residential rates are uniform across the ex-WAPDA distribution companies, so the same electricity bill calculator Pakistan households use works for LESCO, IESCO, MEPCO, GEPCO, FESCO and the others. Fuel adjustments and taxes on the bill can still differ.

Where can I download a duplicate electricity bill?

Ex-WAPDA customers can download a duplicate bill from the PITC web bill service at bill.pitc.com.pk using the reference number printed on an old bill.

Bookmark this electricity bill calculator Pakistan page and check it against your next bill. We will update the rates whenever NEPRA notifies a new residential schedule.

Muhammad Asad
Muhammad Asad
A passionate content writer and digital publisher covering political news, business updates, and sports trends. Focused on delivering accurate reporting and engaging storytelling, with timely insights on national and international developments. Dedicated to providing readers with reliable, easy-to-understand, and informative content across multiple categories.

Related News

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest News